Hydraulic Fracturing Chemical, Flow Back Aid or Water Recovery Surfactant Supplier, Manufacturer

Home

Black Gold Chemical Services specializes in Hydraulic Fracturing Chemicals and Transportation of the same. Our range is Encapsulated Gel Breaker, Ammonium Persulfate, Frac Diverting Agents, Scale Corrosion Inhibitors, Sodium Chlorite, Clay Stabilizer, Hydrogen Sulfide Scavenger, Flow Back Aid, Acidizing, Pressure Pumping or Fracturing Chemicals, Barite Scale Dissolver, Clay Stabilizer, Permanent Clay Stabilizer, Clay Inhibitor, Iron Control, Iron Reducer, Horizontal Drilling Lubricant, Coiled Tubing Lubricant, Biocides, Relative Permeability Modifier, Friction Reducer, Guar Gel, Xanthan Gum Slurry, Crosslinker, Non Emulsifier, Emulsion Breaker, Foamer, Completions Brine Emulsion Breaker, FR Breaker.

S-112, Flow Back Aid or Water Recovery Surfactant Specifications and Details

Physical & Chemical Properties:
Appearance: Clear, Straw Yellow Liquid
Odor: Faint Organic
Density: 8.4 lbs/ga
Pour Point: Less than 20 deg F
Flash Point: Greater than 175 deg F
Typical Surface Tension: Less than 30 dynes/cm2
Typical Interfacial Tension: Less than 3 mN/m
Wetting Characteristic: Water Wetting.

Surfactant S-112, Water Recovery Surfactant (FlowBack Aid)

S-112 is a proprietary non-ionic, non-flammable surfactant for use in acidizing and fracturing treatments. It is designed to improve recovery of the injected stimulation fluids and enhance ultimate recovery of hydrocarbons. It effectively lowers interfacial tension between stimulation fluids and hydrocarbons. It lowers the capillary pressure and allows for greater penetration in to the formation face, therefore promoting the recovery of stimulation fluids, connate fluids and hydrocarbons.It is compatible with all known fracturing fluid additives and has been successfully used in West Texas, South Texas, East Texas and Oklahoma for the past few years. S-112 is also pumped with acid spearheads to lower the breakdown pressures and minimize the possibilities of forming acid/oil emulsions where a separate non-emulsifier is not used.

Please contact Suppliers Manufacturers:

Black Gold Chemical Services

Tel: 1-855-346-6742.
We have our facilities in Beasley Houston Area, Midland, Pleasanton, Texas, USA and in El Reno, Oklahoma, USA.